dataloggers, thermometers, hygrometers...
English Česky Africa China Español Français Magyar Polski Sweden USA UAE

Outputs 4 - 20 mA, 0 - 10 V, RS232, RS485 and relays
Sensors and regulators

Sensors and regulators
Terminal for power and signal RS485/RS232 - for more details please see electrical wiring below on the page.
Relay - the device is equipped with two relay outputs for alarming or controlling of external devices. It is possible to assign any input value to each relay, to set comparing limit, delay, hysteresis, acoustic alarm or change its status by means of Modbus communication protocol.
Keypad - two output relays can be configurated by means of keypad. Then any input value can be assigned, set comparing limits, hysteresis, delay or audible alarm.
Acoustic alarm - triggered alarm can be deactivated by pressing ”ESC”. This possibility can be disabled and the acoustic alarm is active for the duration alarm condition.
Three binary inputs - these inputs are not galvanic isolated, connection terminals +U are internally connected to the device power supply i.e. the +U terminals provide the same voltage level as power supply.
Design - measuring elements can be integrated into the body of device or may be on the cable with lengths of up to four meters. External probe may be designed for pressure of 25 bar.
LED signalization - visualization of binary inputs is done by three LED diodes. Other two diodes signed as ALARM 1 and 2 show alarm state and relay status.

Main features

  • accurate measurement of
  • - temperature
  • - humidity
  • - dew point
  • - atmospheric pressure
  • - two-state events
  • - CO2
  • industrial design with protection up to IP65
  • - integrated sensors
  • - with external probe
  • - duct mount design
  • interior design
  • ATEX design for potentially explosive atmospheres (zone 2) on selected models
  • relays output 250Vac / 8A or 50 V on selected models

Applications

Building
management

Building management

Industry

Industry

Meteorology

Meteorology

Environments

Environments

Pharmaceuiticals
and laboratories

Pharmaceuiticals and laboratories

Sensors with Ethernet output
Web Sensors

Web Sensors

Main features

  • accurate measurement of
  • - temperature
  • - humidity
  • - dew point
  • - atmospheric pressure
  • - two-state events
  • - CO2
  • communication protocols
  • - SNMP
  • - Modbus TCP
  • - SOAP
  • - XML
  • webserver to display current and the recorded values
  • alarm indication via e-mail
  • PoE on selected models
  • data analysis software Comet Database

Accurate Web Sensor t-line

T-line
Connector for power adapter with output voltage 9-30 Vdc
The Ethernet RJ45 connector for cable connection
Limits of LED indication may be changed by user.
smile 0 to 1000 ppm
serious 1000 to 1200 ppm
angry 1200
to 2000/10 000 ppm
Case of sensor is made of ABS which is very resistant to mechanical damage.
RTD Pt1000 temperature sensor together with state-of-the-art capacitive polymer sensor.
Sensor cover with filter from stainless steel mesh. Filtering ability is 0.025mm.
Air intakes for CO2 measurement.
Display for current measured values.
External mounting holes for easy and fast mounting without the need to take off lid cover.

Cost effective Web Sensor p-line

P-line
Connector for power adapter with output voltage 4.9V - 6.1 Vdc
The Ethernet RJ45 connector for cable connection
Case of sensor is made of ABS which is very resistant to mechanical damage.
All temperature proves and temperature, humidity probes you can find on www.cometsystem.com
Connectors for connection external temperature and combinated temperature and humidity probes
External mounting holes for easy and fast mounting without the need to take off lid cover

Web Sensor h-line with relays and two-state inputs

Wall mounted design

H-line
Mounting holes for mounting the unit on the wall
Network port RJ45
Power port for 9-30 Vdc
2 x relay outputs.
Button for deactivation of audible
Temperature and humidity sensor
Sensor cover with filter from stainless steel mesh. Filtering ability is 0,025mm

Rack mounted design

Black mounted design
Visualization of two - state inputs is done by three LED diodes. Each relay status is indicated with other two LED diodes described as ALARM1 and ALARM2 shown also on LCD.
Glands for cables
Ethernet RJ45 connector for cable connection
Mounting brackets to rack 19″
RTD Pt1000 temperature sensor together with state-of-the-art capacitive polymer sensor
Display with keypad for setting

Web browser interface

Current measured values and sensor settings can be accessed directly through the web interface from your web browser.

Sensor settings can also be done directly in a web browser in your PC, smartphone or tablet. All you need to do is enter the IP address of the sensor, open Settings and set up everything from communication to alarm e-mails.

Settings

Current measured values are available on-line directly on a web browser from anywhere, all you need to do is enter the IP address. Alarms are indicated by a red field.

Demo

Graphs of actual values can also be displayed through a Web browser. You can display up to one thousand measured values.

Phone

 

Hand

Record and Analyzation

data sorage in CSV file or in the Comet Database software based on MS SQL

Record and Analyzation

Comet Database software offers:

  • data stored in one place and accessible
  • with Comet Database Viewer
  • to provide data in table and graph
  • to print and export data
  • alarms via SMS texts and emails
  • acoustic and visual signalization of alarms
  • compatibility with all Comet System devices
  • and 3rd party devices
  • displaying of online values

Applications

Building
management

Building management

Industry

Industry

Meteorology

Meteorology

Environments

Environments

Pharmaceuiticals
and laboratories

Pharmaceuiticals and laboratories