Temperature and humidity regulator with RS232 output, cable 4 meters
Humidistat, thermostat with two relay outputs. Outdoor, indoor use.
Relative humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. Three two-state inputs.
The device is supplied with T+RH probe with 4 meters cable.
- 
									codeH3331-4
- 
									Warranty3 years
- $774
Technical data
Measured value
												
													Temperature
												
											
											
												
													Relative humidity
												
											
											
												
													Counted values (dew point…)
												
											
											
												
													Two-state signal
												
											
							TEMPERATURE SENSOR
								Measuring range
								-30 to +105 °C
							
							
								Accuracy
								±0.4 °C
							
							
								Resolution
								0.1 °C
							
						HUMIDITY SENSOR
								Measuring range
								0 to 100 % RH
							
							
								Accuracy
								±2.5 % RH from 5 to 95 % at 23 °C
							
							
								Resolution
								0.1% RH
							
						DEW POINT
								Measuring range
								-60 to +80 °C
							
							
								Accuracy
								±1.5 °C at ambient temperature T <25 °C and RH >30 %
							
							
								Resolution
								0.1 °C
							
						RELAY OUTPUTS
								Quantity
								2
							
							
								Maximal voltage
								50 V
							
							
								Maximal current
								2 A
							
							
								Maximal power
								60 VA
							
						BINARY INPUTS
								Quantity
								3
							
							
								Signal for binary inputy
								dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
							Inputs are not galvanically isolated.
								Minimum pulse duration on binary input
								500 ms
							
							
								Voltage across open contact
								< 3,3 V
							
							
								Low voltage level
								0 to +0,5 V
							
							
								High voltage level
								+3,0 to +30 V
							
						GENERAL TECHNICAL DATA
								Operating temperature
								-30 to +80 °C
							
							
								Channels
								1x connectable temperature+humidity probe
							
							
								Counted values
								dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
							
							
								Acoustic alarm
								from built-in beeper - switchable
							
							
								Output
								RS232
							
							
								Range of humidity sensor temperature compensation
								all temperature range
							
							
								Available temperature units
								degrees Celsius, degrees Fahrenheit
							
							
								Communication protocol
								ModBus RTU and Advantech ADAM compatible protocol
							
							
								Power
								9-30 Vdc
							
							
								Protection class
								IP65 electronics; IP40 sensors
							
							
								Dimensions
								136 x 159 x 45 mm; length/diameter of external probe 88/18 mm
							
							
								External probe cable length
								4 meters
							
							
								Weight
								approx. 500 g
							
							
								Warranty
								3 years
							
						
 
         
         
         
         
         
         
         
         
         
         
         
									 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
														 
													